Question about Maytag Refrigerators
CHANGE FILTER LIGHT" ON THE FRONT DOOR OF THE FREEZER SIDE? Hold the lock and light buttons in together for 3 secs. or so and the light will go out! You don't even need to change the filter to do this
...Help!!! Maytag side by side AFTER CHANGING THE FILTER . YOU THEN HAVE TO HOLD DOWN THE LIGHT BUTTON AND THE LOCK BUTTON AT SAME TIME FOR APPROX 3 SECONDS AND THE FILTER LIGHT WILL FLASH THEN GO ...
...side with water/ice dispenser in door and filter for water. I changed the filter upon moving into house the change filter light came on and I can't get it to go off. How do I reset the change filter ...
I CHANGE THE FILTER....I PRESSED AND HOLD THE CHANGE AND LIGHT INDICATORS ....SO I WANT THE CHANGE LIGHT TO GO AWAY BUT STILL THERE ???//WHY? Press and hold the light and lock indicators until the ...
...side refrigerator Model # mzd2766gew. of course it did not have a manual.. I need to know how to reset the filter ligh. I can get the service manual for you. Here is what the manual tells you on page ...
side in it the center get a flat screw deiver pull it up a little put back bulb plug unit if it dont light change switch THE LIGHTS DO NOT WORK Is the power supply cord unplugged? Plug into a grounded
Question about Samsung Refrigerators
...but how do you reset change filter light? Have replaced the filter. The light is still red. Answer: After changing the water filter, press Cubed and Crushed buttons simultaneously and hold 3
Question about Jenn-Air Refrigerators
...light is still on. You need probably to change the dispenser solenoids which swith water on dispenser Hi, Just check THIS link out.It will solve your problem. From my side i believe it is the control ...
LIGHT" I HAVE A MAYTAG SIDE BY SIDE REFRIGERATOR AND HAVE JUST CHANGED THE WATER FILTER INSIDE - HOW DO I TURN OFF THE "CHANGE WATER FILTER" BUTTON ON THE OUTSIDE OF THE DOOR? Press light and lock and
I just installed a new filter. How do I get the change filter blight to go off? To reset the CHANGE FILTER light: Press and hold the LIGHT and LOCK pads until the CHANGE FILTER light blinks (approx. 3
55 questions posted
Usually answered in minutes!
1,894 Questions
803 Questions
611 Questions
487 Questions
348 Questions