Whirlpool 21.0 cu. ft. Top Freezer Refrigerator with IceMagic Plus Ice Maker "put frig back together" Questions

...back in the middle of the freezer. unclogg it hot water or shop vac be carefull good luck!! drain line should go to a pan under the frig, in the back make sure it drains before putting back ...

...frig.  Remove the tray, clean exit hole and check to see if drain tubing is clogged.  Fairly easy to do, just pay attention to what order you take things off and just reverse the order to ...

...frig right now. http://www.appliancepartspros.com/partsearch/model.aspx?model_id=219577 thats what you need its not that hard to put together thats the kit that allows air into the fridge and its ...

...back together :) anyways, here is the timeline: -purchased frig -4 months later, frig can't keep anything cold, repair man comes out, replaces motherboard -1-2 weeks later, can't keep anything cold ...

...frig; still warms. If I unplug, it chills, then warms up again. The problem is most likely to be the defrost heater Check the back of the freezer compartment for frost If you have frost on the back ...

...frig full of problems. Mine's done that twice and I take everything out, including the shelves. Then take out the back panel and at the bottom there will be frozen ice. That means when your unit ...

frig model # ED5FHEXNB00 about 4 years old. When we put the handle down inside the freezer to make more ice - water starts to leak through the top of the ice dispenser (the outside of the refrig where

...frig and freezer no compressor,no fan, no display on control board what am I missing? had to take doors off to get it out of the house, put it back together let it sit for a day before plugging in. A ...

...frig out of cabinetry took off lower back panel, looked around, put it back together, pushed it all back in and suddenly started working just fine, a few days later water leak, slow drip from bottom ...

...frig first. Take a volt meter and put the two test probes in each wire end. Plug up the frig. if it reads near 120 volts, you have a bad fan motor. If no voltage, you have another problem. Take the ...