Samsung DynaFlat TX-R2035 TV "audio speaker" Questions

...speaker good. see if your audio amp is getting power (multimeter needed) set to d.c volts.have voltage then look for the input pin that brings audio into the amp,use a 16 -32 ohms speaker across gnd ...

...TV's had actual speaker connections......... 2)The audio output on your 32" Sharp must go to an amplifier, then out to speakers..........................

...amplifier audio out (left, white color) -----------> speaker (black wire) amplifier audio out (right, red color) ------------> speaker (red wire) Thank you for using FixYa. Have a great

...speaker. The audio jacks are to provide audio to a tuner and amp which then power separate speakers. The audio output jacks just cant power speakers on its own in this set. Hope this helps you. Don't ...

...SPEAKER ARE NOT WORKING CAN NOT HERE THE AUDIO. THE SPEAKERS ARE NOT WORKING CAN NOT HERE THE AUDIO.I NEED NEW SPEAKERS. contact the manufacturer, your TV will need servicing since parts needed to be ...

...Just check the rear of the television if by chance you have left any cable still connected to the audio output jack. If there the TV might be trying to redirect the audio to an external device not ...

...will give you a audible sound if that is absent then your speaker is bad..if there is sound then check the ic or transistor in your audio section.the speaker wire is connected to the audio

...audio speaker ,audio ic & its supply voltages,check audio signal hi, the problem as u know is in the audio section, first thing to check if there is audio using a headphone,or audio line out then the ...

...speaker might be damaged 2. the audio output ic faulty check the speaker first. u can simply check the speaker. pull out its socket from the main board and connect a battery( 1.5v AAA) to the speaker ...

...It had sound before. I've tried to mute button and it's not that. I went to the menu and clicked audio and that took me to another menu that had 1. Mute 2. Tone Controls 3. Audio Processor 4.