Bosch Nexxt 500 WFMC3301 Front Load Washer "knit back" Questions

...knit clothes. It doesn't seem to affect the light clothing or smooth weaves. Just the knits and usually just the dark colored clothes. I have the same problem. Can't get soap out my clothes. I have a ...

my washer bangs and goes off balance in the spin cycle. It has been leveled and is not off balance. Without knowing the type of washing machine that you are using I can tell you generally that: First ...

...even a hum....ive trid to drain it on all drains cycles on the different setting [ie.perm press, knits, delicates].....HELP me please!!! Thanks I am a retired engineer of 20 years and the problem ...

...D" or an "F" code depending on your setup. Now push the lower left button on the panel (Delicates & Knits). your display should read 600 or 6 and a couple #'s (this is coin count). Replace the plug & ...

...is a little hole into which you gently push - but only a little way- a suitable object such as a knitting needle. That releases the catch and it should be possible to turn the filter cover ...

...side of your Bosch you'll see a small round cover like so... With the aid of a small screw driver, knitting needle, or anything small enough to fit in the small hole in this cover... It will push in ...

...back up and starts washing again in knit mode would that be the timer or the pump The belts are on and working. There are two types of pumps; direct drive and belt drive. The direct drive is mounted ...

...and than re-install it may remedy the problem. Try this...With the aid of a small screw driver, knitting needle, or anything small enough to fit in the small hole in this cover... It will push in ...

...the bottom of the agitator, and the back of the fins near the center of the agitator have a kind of knitting needle hook shape the them(best i can think of to describe it. I have clothes that keep ...

...side of your Bosch you'll see a small round cover like so... With the aid of a small screw driver, knitting needle, or anything small enough to fit in the small hole in this cover... It will push in ...