ice bin engages from the rear of the bin, the ice bin yoke should fit into the forks of the auger motor, but should be the opposite of the forks to work ( like a X ). I hope this helps. I would remove
...BIN AUGER. ALSO, BE SURE THE ICE IN THE BIN HASN'T MELTED TOGETHER BINDING UP THE AUGER. IF NECESSARY, REMOVE THE ICE AND START OVER WITH FRESH ICE. YOU MAY NEED TO REPLCAE THE COUPLER OR AUGER
...if the motor turns. If it does reinstall bin. If it doesnt make sure ice has not blocked it. reinstall bin and try the ice button. hope this helps if this doesnt fix it the drive motor has went
...ice bin and close the door, push the dispense button and then open the door quickly to see if the auger is turning. If is is then dump your ice bin and let it sit out until it is completely ...
...ice bin (near the very front) indicating an air leak? Is the bin installed properly so the bin auger drive is connecting to the bin auger? Knowing these answers will point you in the right direction ...
...spin It sounds like the auger is not lined up properly this can happen if someone removes the ice bin to get ice. remove ice bin and ck auger for ice jamming it and try reinstalling bin. good ...
Question about LG Refrigerators
...ice bin to fit properly and dispense ice after it comes out. This is on a LG LSC27910TT fridge. Suggestions on what to look for? It produces ice and dispenses water through the door but we can't seem ...
Question about GE Refrigerators
...ice bin is full. When i press the for ice to dispense , the light dims and the compressor stops. Can i change the circuit board at the front of the refriderator? Will that resolve my problem? Try ...
...ice bin seems to lock in place of, so i dont' think it is the whole bin moving up. I would liekto see the assembly instructios for the auger and ice storage system. The assembly or even the auger are ...
2,353 questions posted
Usually answered in minutes!
803 Questions
611 Questions
487 Questions
348 Questions
283 Questions