Whirlpool GD2SHGX Refrigerator "remove drain pan gold" Questions

...to follow line? Sounds like a clogged drain. Remove food, remove bins and shelves. Remove ice maker if freezer is in the bottom. Remove back panel. .melt ice on drain pan and run hot water into

...drain plug to drip pan I have tried defrosting the area and removeing any ice and water build up. Other solution here indicated there may be a clog. I need to know how to remove drip pan- some say on ...

...I have attached some pictures. Thanks Venkat you have a frozen or blocked defrost drain behind the back panel with the vents in it remove the panel and clear the drain at the bottom in the silver ...

drain pans. Make sure the defrost pan is in place. Remove the front bottom kick panel and check to see if there is any water in it. There should be just a little defrost water in the pan. Look for the

...drain tube, remove panel back/bottom of freezer..you may see ice build up...melt ice with hair dryer/heat gun...you will see a pan below evaporator...melt ice in pan...dry water up in pan with paper ...

...remove the pan? i don't think there is a pan in your machine,it's built into the bottom frame near the compressor where the water evaporates from the heat.most likely you have a blocked drain ...

...drain. If you will remove any ice and use a coat hanger or screw driver to push down through that hole you should be able to get it unclogged. Take a small cup of water to verify that you have it ...

remove the inside back wall to get at the drain hole.melt out all the ice with a hair dryer,you might be there for 10 to 20 minutes or a little longer depending on how much ice is there,when the drain

drain If you experience any clogged drains, they must also be unclogged or replace. If you experience this at the ceiling of your unit it can be attributed to a clog in the freezer section. Remove the

...stop water from leaving the freezer. Not a big problem or difficult repair. Just clear the drain and remove all the ice from the drain pan. Could take 15 mins or so to complete this.. I hope this ...