Anetsberger Silverline SLG100 NSF Deep Fryer "pilot lights" Questions

gas is on pilot won t light Hello there: The problem you mention is not that clear. The pilot won't light or the pilot lighted but won't stay on is two different problems. If the pilot won't even ...

Pilot light won't stay lit The pilot light wouldn't light. I replaced the thermocouple, now I can get the pilot to light, the pilot/heat will start, then after 10 minutes or so, I have no flame or ...

my pilot light is out on pitco 35cs fryer, i cant locate it to relight it Pilot assembly is located between the two middle burners, this is where the pilot is lighted. You have to turn the gas valve ...

The burners will not light. The pilot does light. I had my staff try to hit anything that looked a reset, but I don't know if the high limit switch has a reset or if the switch itself is bad. The ...

Pilot wont light. Only second time I have lit the pilot. Wont light. Is there an adjustment i am missing??? Thanks Firstly make sure the gas knob is exactly in the pilot mode some are finiky and won't

...pilot lights flame on pilot looks bigger on first one that work is the pilot ajustable cant find adjustment Hi there! Try to check first the incoming and running gas pressure, it must comply with the ...

...pilot lights keep holding the pilot knob in for 20 seconds. Now let off the pilot knob. Pilot should stay burning. Now turn the gas valve from pilot to on. Now turn the thermostat to desired temp and ...

Pilot is off. How do I turn back on the pilot ? Most fryers have pilot lighting instructions on the inside of the door. If yours doesn't then find the gas valve, turn the knob to the pilot position, ...

Pilot light won't stay lit. Ensure that gas is getting to the pilot , or you may have a devective pressure regulator. If gas is getting to pilot and pilot is turning off, then you need to replace the ...

Pilot Light Pilot light will light, burners ignite and fryer comes up to temp., the burners go off and the pilot light stay on, but when the burners start to ignite again the pilot light goes out and ...