...shop vac and attch it to the end of the drain hose to remove all the water. the located the drain pump and remove all the hoses from the pump and look for any obstructions,make sure to check the hose ...
...shop vac, you can use a mop bucket and lower the drain hose enough to allow gravity to drain. Make sure to place the drain hose back in the standpipe between emptying the shop vac or mop bucket to ...
Question about Frigidaire Washing Machines
...shop vac and vac out all the water in the tub and then lossen the hose or center of pump until water starts to leak out and vac it up as it comes out,check the pump and put it back together,add some ...
...shop vac and attach it to the end of the drain hose to remove all the water. then remove the front panel and check the hose that comes down from the bottom of the tub to the drain pump,if you do not ...
shop vac and attach it to the drain hose to remove the water.If the water comes out easy there maybe something small stopping the pump,If it comes out hard there may be a piece of clothing stuck there
...shop vac and attach it to the end of the drain hose to remove the water. After the front panel is off take the drain hoses off the pump and look in them for something stopping the pump.make sure to ...
...shop vac out or a bunch of rags and a bucket. The water needs to go. The shop vac will pull the water out the drain hose. Just remove it from the standpipe and place the nozzle in the hose and pull ...
...shop vac attach it to the end of the drain hose to remove the water. once you remove the water check the drain hoses and look for anything stuck in the or the drain pump itself and make sure there is ...
...shop vac and attach it tothe end off the drain hose and remove all the water.once the water is removed move the washer away from the wall. tilt it back and look under the front you should see the ...
Question about Whirlpool Washing Machines
...shop vac to remove water from the tub. Remove the screws on the rear of the control console on the right and left back corners (2 screws). Fold the console to the rear of the machine. Remove the 2 ...
93 questions posted
Usually answered in minutes!
2,979 Questions
1,498 Questions
947 Questions
680 Questions
658 Questions
