Whirlpool GC5SHEXNS Side by Side Refrigerator "motor" Questions

what are the ohm reading, and voltage reading on the evap motor? Ohm reading is the resistance value of the motor windings. This is a small capacity motor so it's winding resistance will be high. ...

...to be working but the left side is. We put a new bulb in but it is not the bulb. Could it be the motor The right side does not seem to be working but the freezer seems to be. We changed the light ...

I have a Amana ssd21sl, the evaporator coil freezes up, The fan motor above does not come on, but have 115v to it, Is fan motor bad. You really need to measure the Ohms resistance for the motor. OL ...

...NOT WORKING<ALSO LEAKING,FREZZER KINDA COOL,,,FRIDGE NOT check and make sure the condenser fan motor is electrically connected. Some units have a plug that plugs on to the motor. Make sure it is ...

motor is not running fridge was not cool not motor quit running chec the termostat, he start and stop the motor, also chec rhe start relay , is on the box connection of motor, if thoes are ok and it ...

fisher&paykel fridge motor does not run motor not running Please check the voltage to the compressor as the program cycle is switched ON. If there is voltage without the motor running check the ...

GE Profil Artica I have a GE refrigerator, the freezer is'nt cold, the motor in the back of the freezer is not running, What can I check to see if it is the motor or the circuit board? You say the ...

i have a ge sbs model pcp23shmffbs. the condenser fan motor is running slow, but turning freely. the fan motor is rated at 11.3 volts dc and supply to fan motor is only 6.7 volts. is the condenser fan

GE Refrigerator Eva. Fan Motor I have a GE Refrigerator Model Number: GTS22ICMARWW and the evaporator fan motor is not turning on, It is a DC motor with 4 wires Red, Blue, Yellow/Black and White. The ...

Heater/ Air Conditioner Blower Motor The cabin blower quit working in my !995 Lincoln Continental. I was told by the dealer that it sounded like it might be the resistor. I obtained one, and installed