RCA 20F420T 20" TV "remote working standby" Questions

...working. if not remote .. I have seen alot remote recievers fail inside the set. and it was mostly due to standby voltage failure .....pinpoint? get a shematic and check reg. ic and zener diodes... ...

...standby circuits if no remote works on the tv, but you can operate it manually. the standby circuits always stay on that is how you are able to power up the set. go to your remote infrared circuits ...

...way they were switched off.if remote used to standby then switched off they come back on in standby requiring remote.unless it has buttons under a flap or on case then channel up or down should ...

...remote that seems not working. Sony TV would either turns On or standby light will blinks if TV gets any internal problem. You question shows standby light stays On that means TV does not receive ...

...standby supply is not there, and the remote sensor also won't get power, and won't work. If this LED lights up, standby/power voltage is there, and the infrared sensor inside the TV is faulty, ...

Remote no longer puts TV in standby There are several functions on the remote that still work...channels and volume for example. But the remote will no longer put the TV in standby mode nor do the two

...standby mode. The original remote, I have discovered, somehow has shorted out and no longer works. Is there any way that I can regain the use of my television? A universal remote control might not ...

...remote that is not working properly. as part of isolating the issue: 1. have the SKY remote control replaced or 2. grab a universal remote control (borrow or buy) Un plug your sky decoder and tv for ...

...standby mode? im not bothered wheter the dvd recorder remote works with the tv or not, but at the moment, the tv is useless. If you can not turn on TV set with the power button on the TV its not a ...

...l want to get it off this accidentally put on standby now i can not get it off to get my tv working agaen there should be a button on your remote or you can go through the menu to take standby ...