Dayton (3E379) Heater "thermostat gas" Questions

Ad

...thermostat is turned up Gas flow is good and Pilot is remaining lit with strong flame Changed thermo-coupler and cleaned pilot areas and burners(3 burners) Checked fan and electrical - All is working ...

Ad

Question about Cozy Heating & Cooling

1 Answer

thermostat off, but the flame doesn't go down. It is also leaking gas out of vent on the gas valve where you turn the Pilot and Gas on. What should I do. Shut off the gas to the heater. Bad gas valve.

Ad

Question about Vornado Heating & Cooling

1 Answer

...thermostat. The old gas contol valve would need to be removed and the new one installed. Then the thermostat wires would connect to the gas control valve millivolt system. A heating company can ...

...Burner still runs even with thermostat switch in the off position. probably not a thermostat problem but a gas control solenoid or stuck valve call a gas fitter for a proper diagnosis and ...

Question about Cozy Heating & Cooling

2 Answers

gas heater Mod # CLV 335A every time the thermostat tries to turn on the heater, the pilot light goes out. Thermostat and thermopile/coupler are brand new get someone to check the gas pressure that is

Question about Cozy Heating & Cooling

2 Answers

...gas, uses a millivolt thermostat. I found that the thermostat was the problem. I went and bought an $18 thermostat and replaced my old one. Now it works fine. I have heard the thermostats that come ...

...Gas Furnace and Hunter Thermostat not working I originally thought the problem was in the thermostat. The temp display just blinks and the heater won't run. If you turn the heater off at the ...

Question about Honeywell Heating & Cooling

1 Answer

unit fires, you have a thermostat or thermostat wire issue. If it still does not run, check for 24 volts at the gas valve. Could have a bad transformer, bad gas valve or the relay for gas valve is bad

Question about Cozy Heating & Cooling

2 Answers

thermostat going to the gas valve inside the heater. If it continues to heat you have a bad gas valve. If the heater shuts off, you have a bad thermostat wire (short). I need help my wall mount worked

Question about Williams Heating & Cooling

1 Answer

...you have a bad thermostat wire or connection. If not, you will need to check for 24 volts at the gas valve while the thermostat is calling for heat. If yes, bad gas valve. If no, bad

Not finding what you are looking for?
Dayton (3E379) Heater Logo

60 questions posted

Ask a Question

Usually answered in minutes!

Top Dayton Heating & Cooling Experts

Paul Carew

Level 3 Expert

3808 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Dayton Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...