...bottom of your machine you can clear this but you need to empty the machine first, to do this all you need to do is put the outlet pipe into a bowl on the floor and it will empty by gravity, if the ...
needs emptying, have emptied but keeps stopping, can we clean the filter at the bottom of the dryer yes the bottom filter can be removed and washed out with warm water, this is the same problem we had
...bottom of machine. depending on fitting of clip holding pipe onto your pump, use suitable tool to remove the clip. You can now remove the pipe from the pump. check inside the pump also.If you need to ...
...empty pump filter (Probably behind a little door on the bottom of the machine. You may also need to check the empty pipe and the drain it goes into are also clear. 99% probability of a blocked ...
...pipe should come from the bottom of the machine and is your waste which will need to be connected to the sink waste or another waste pipe.you must ensure the waste pipe is fitted otherwise when you ...
...bottom of the rear of the machine. Unscrew the 3 or 4 screws and unclip. Directly below the drum, you will now see a rubber "Cup" like bulge in the black pipe, with a plastic tube connected to a ...
from drum movement. and just need fitting back on. also the drain pipe needs to be at least 3 inches from the top level with the water in pipes height of the washer so the water does not just come out
emptying is a blockage. This usually involves removing the pipe connecting the bottom of the tub to the pump, but be careful because dirty water will gush out. The blockage could be due to a lost item
...pipe that is attached to the filter housing. You may need to tilt the machine back to do this or alternatively dis-connect all pipes and lay down on its side to allow better and easier access. Check ...
57 questions posted
Usually answered in minutes!
123 Questions
44 Questions
24 Questions
26 Questions
