Dyson DC33 Multi-Floor Upright Bagless Vacuum Cleaner "vacuum carpet setting" Questions

...Vacuum marking carpet My Bissell is great at getting pet hair up but when I use the tools it sometimes rubs away carpet where the brushes near the wheels have been stood. I have damaged carpet in 4 ...

...carpet old the vacuum may not be able to handle the carpet,go to a vacuum store and see if you can try somthing else out some stores well let you rent them out kirby is a good vaccum i think my ...

...set to "Floor" setting the vacuum will not turn on. When the switch is moved to "carpet" setting the vacuum starts. because floor means for lanolium it may have a sensor that detects carpet or ...

...carpet on floor setting. The brushes work and the vacuum works but it doesn't spray water through the jets when the trigger is pulled. The upholstery tool works fine - both water spray and vacuum. I ...

moving is for hard wood floors. If you cant tell, then setting 1 is most likely for carpets and 2 is for hard wood floors. Your machine is primarily a carpet vacuum cleaner, so 1 should be for carpets

...carpet, the brushes on the vacuum may be catching on the carpet, causing the belt to slip, overheat and break. If the vacuum has a height adjustment, try adjusting it to a setting which lifts it ...

vacuum adjust to my new carpet height? We recently got new carpet and it has a higher pile than our old carpet. When I put the setting to carpet it I'm not possible that I've designated the right DC33

vax hoover suddenly hard to push on carpet have it the right setting for my carpet but is still hard to push Make sure you have it set to carpet, other wise not sure

...carpet installed. When I tried to vacuum I could barely move the machine. How do I fix this . I already have already tried it on the highest setting. Your carpet yarns may be too long for your

vacuum my carpet - marks, like a rake might leave, show where I've cleaned. Is there an adjustment to eliminate these marks? The vacuum is working fine- you have the brush setting set to low- raise it