...UNDER the washer frame and rocked back onto the frame to ensure that the small cleats on the frame fit into the slotted grooves on the washer case base. If you do not get the case seated correctly
fit all washers. if you mean the click fit hose to a sink tap, with the waste water drain buldled in so the washer can remain portable Sears has them as a to-order item and most parts stores will have
Question about Tricity Bendix Washing Machines
washer has hot and cold inlet but I only a have cold water suply What you need is a fitting called a (Y) piece. This is usually available from any good hardware store such as B&Q, and the like. It
Question about Kenmore Washing Machines
...on any level setting There is a tube that goes from a sensor near the bottom of most washers and fits into a fitting near the dial that selects the size of load you will be washing. This tube ...
...undo this as well and pull the old door seal out through the hole in the door,,,the new seal is fitted to the iner drun first so you need to turn the new seal inside out to fit it,,,push the seal ...
Fit a new door hinge anyone able to advise me on how to fit a new door hinge please? Remove the wire clamp securing rubber seal to front of washer, pull seal of front of washer, this will give you ...
tRICITY BENDIX AW1000W INLET HOSE LEAKING Had my machine fitted and its been leaking a very small amount gradually. The inlet hose that attaches to the machine is wet round the outside. I took it off ...
Water is on the floor underneath the washer have you checked the water fitting at both ends if they are dry and both tight look at the waste connection i would advise getting PTFE tape for screw ...
fitting new belt how do you fit a new belt onto a hotpoint aquarius wma30 washing machine Remove top cover and lower rear panel of washer With some help, tilt washer forward, and fit belt round motor ...
113 questions posted
Usually answered in minutes!
691 Questions
231 Questions
191 Questions
118 Questions
116 Questions