Question about Bosch Microwave Ovens
...error code E302. What is this error? The fan stopped when the error code came up. After about 20 minutes, the fan suddenly started running again (still making more noise than we've been used to) and ...
Question about Cuisinart Microwave Ovens
...error codes display and keypad stops working This is the second Cuisinart Microwave oven (cmw-100) we have had in 6 months. The first one we returned for an exchange. This time we are close to ...
Question about Microwave Ovens
...display after a few seconds of operation. I unplugged the for a few minutes unit & tried again but same result (did this a couple of times). I then took the cover off the oven and cleaned with ...
...20 WATTS. 4)Close the Light Cover and secure with screw removed at step 2. If further troubleshooting is needed, I ask that you please let me know the error codes displayed on your appliance. Hope ...
...display will flash if your power goes out. You must reset the clock. If you do not hear a tone at the end of cooking, ensure that you have enabled the audible tone. Also check that you are using the ...
...display has this on it --SE-- , Most of the buttons on the keypad will not work, I have unpluged the unit . It comes back on I reset the clock & everthing is fine , but about 20 minutes later the ...
Question about Kenmore Microwave Ovens
error codes on their Kenmore microwave. How do you get these codes my unit stopped working completley and the display is blank. I have been told to look into the thermal fuse and I am going to take it
...circuit breaker(s) for one (1) minute. Power unit up by turning on the circuit breaker(s). Monitor the oven for one (1) minute to ensure the error code does not display again. Verify oven
...cuts out after 20 seconds what is the problem please Possibly the magnetron is not producing power and as the cavity temperature is not rising, it cuts out. Is there an error code in the
112 questions posted
Usually answered in minutes!
23 Questions
19 Questions