Question about Goldstar Heating & Cooling
...screw on the thermostat in a gwhd5000 air conditioner or any Analog unit to get it to cool down to 40 degrees or so? I'm thinking some maybe all analog thermostats should have an adjustment screw
...40 degree refrigerant and it will start to absorb heat from that air. Super heat is considered to be any heat gain in the refrigerant after the change of state from a liquid to a vapor. SO.....at ...
Question about Bryant Heating & Cooling
...to run continuously trying to. your auxillary heat should kick in. possible heat strip issue. heat pumps dont work well at 40 degrees. when you are trying to pick up heat from 40 degree ambient
and flashes from liquid to vapor inside the evaporator coil. This change of state happens at around 40 degrees. Any heat that is gained in the refrigerant from that point of 40 degrees is called SUPER
side Heater blows cold air when it is cold out side about 30 degrees but it dont do this when it is 40 degrees does anyone know why this is I have a Rheem heat pump roof top model #RQNA-B036JK000 heat
Question about Honeywell Heating & Cooling
...40 to 90 degrees F Cool range: 50 to 99 degrees F 1 degree deadband Here's the operation guide: https://customer.honeywell.com/resources/techlit/TechLitDocuments/69-0000s/69-2603EF.pdf Please mark my ...
Question about Heating & Cooling
Heater will not activate until outside temp. is above 40 degrees A/C works fine. Heater does not activate until outside temp. is above 40 degrees. Fan is on but only blows cold air. If you have a heat
...were registering 72 degrees. When the inside units are off, it the inside unit cools down to 35-40 degrees but when you turn them on, the air coming out is now only 72-73 degrees. doesnt sound ...
...not heat fully. It's 115volt and is a heatpump, these units work best above 40 degrees. They only put out between 95 and 105 degree air. The colder it gets outside, the less heat ya'll are gonna
Question about Ruud Heating & Cooling
what should the low side and high side pressure be on a rudd 3.5 ton R22 unit low side 68 psi or 40 degrees at the coil highside 25 30 degrees above ambient air (outside air)
3 questions posted
Usually answered in minutes!
250 Questions
146 Questions
109 Questions
64 Questions
59 Questions