Question about IBM Computers & Internet
...HyperTerminal *HT* with Com1 *if that?s what you?re using*connected to you console or data port on your router using the appropriate cable. - Create a new *location* in HT and name it something ...
Question about Cisco Computers & Internet
...hyperterminal to use the COM port you have plugged in to, speed 9600 8 bit no parity. (8N1). Without the serial cable you need to know the router IP and password. if you mean hyperterm, attach the ...
...hyperterminal with correct settings Bit's per second 9600, data bits 8, parity none, stop bits 1, flow control none and then i switch the router, then pressing break/pause button, i see the boot ...
...Hyperterminal, please solve this problem. Thanks There are two things that can cause this: Incorrect serial settings. The default settings are 9600 baud, stop bits of 1, and parity 0. However, it is ...
...the Vlan interface so you can use the fast ethernet interface to connect. https://www.hilgraeve.com/hyperterminal/ ...
...software/configuration/guide/857sg_bk.pdf But simply put, - You have to enable the web interface in Hyperterminal/Telnet/Terminal - To connect to your router this way, open your Terminal and type the ...
...settings that you think may fix problem, but obviously I need some direction. Thanks in advance! Profiler Try this and see if it works for you. Telnet into the modem. Hyperterminal will work fine for ...
hyperterminal settings :9600,8,n,1 if you find yourself having to console in. Hope this helps a bit. (go here for user guide) http://www.arcelect.com/2603_and_2620_qs.pdf It is most likely 192.168.1.1
...DSL-500? You must use the RS-232 serial cable using terminal emulation software such as Microsoft HyperTerminal. Connect the cable from your computer to the console port on the DSL-500 or DSL-504. ...
4 questions posted
Usually answered in minutes!
57 Questions
67 Questions