IBM NetVista PC Desktop "reseat 8" Questions

Reseat the processor. 8 beeps - This indicates a video memory read/write failure. Reseat the video card (if any) and memory DIMM or SIMM modules. 9 or 10 beeps - This indicates a ROM (Read-Only Memory

...card. 8 If the system video adapter is an add-in card, replace or reseat the video adapter. If the video adapter is an integrated part of the system board, the board may be faulty. Copyright ...

...Reseat the memory, turn on the computer and test it again if the same thing 8. If you have 2 memory chip inserted in your computer tower memory slot, remove the other one and turn on the computer, do ...

...- no other indications. thanks for your help, [email protected] 8 beeps means video problemTry reseating the video adapter look to see if the fan on video adapter is working if it has one? IBM ...

8 bit graphics spontaneouly Open up your case and reseat your graphic board. If this doesn't fix your problem then your graphic board has an issue. Unless you are using a top of the line graphic board

...you tried another monitor on the PC? Do you have accelerator card/graphics card that maybe needs reseating with a clean, a sure sign of this is 8 short beeps on POST ...

...8 beeps in apid succession upon boot indicates a memory issue I would reseat all 4 RIMMs . If that doesn't help remove the 1 you had removed earlier along with it's mate and try again. If it ...

...reseat the battery. 8. Replace the rear plate and the retaining screws and reseat the main battery. 9. Attach the AC adapter and power on the system. 10. Update to the A05 BIOS revision 11. If a 5 ...

...8 then the hard has gone bad , if u get any other error then jast open the tower and reseat the hard drive and the sata cables , the hard drive cable will be jst below the dc/dvd driive looks lik a ...

...into your motherboard, 8. Reseat the CPU 9. If all of those things failed, most probably that the power supply is causing the problem. it's also possible that the motherboard is affected, I hope