Frigidaire PLHS67EGSB Stainless Steel Side by Side Refrigerator "freezer digital reads" Questions

freezer bottom digital display not working unplugged and waited 30 minutes and plugged back in can hear it kick on when plugged back in but still no digital read out is it in some kind of defrost mode

...digital reading would come back on. About a week ago, the freezer warmed up to 10 degrees and I moved everything to the freezer in the basement. It started working intermittently since and now the ...

freezer are normal. why you are getting a reset is strange. Use another digital thermometer and take readings in both locations. I suspect that there will be a different story and then you can go from

...digital reading to set the temperature does not show. How do I reset to show the reading so I can set the temperature on the refridgerator and bottom freezer. ...

...Freezer and Frig both quit working, can you help? Digital read out on Front of unit reads 0F and both sides stopped working Sounds like it is in display mode. It will go into display mode by pressing ...

Freezer temperature dropping/digital display reading zero +/- 2 At first we though the freezer or refrigerator door had been left open. Ice was melting and dripping in freezer, food was thawed out, ...

...digital display reads 88 degrees for the fridge and the freezer. The 88 display on the right is flashing. None of the buttons work when pressed. reads 88 deg/ ok is frig that warm also .. if so ...

digital display say fridge is 1 and the freezer is -21 While it could be the main control board, I would check for a defrost circuit failure first.  If you take off the read shield of the freezer

...digital diplay/control on freezer door)- problem seems intermittent. After a power cut yesterday the digital display seems to have swapped sides i.e. Temp on fridge side is displaying freezer range ...

...digital controls then set them to 0'f for the freezer and 37 or 38'f for the fridge to start and make adjustments after 24 hours if needed. If you have knobs, then try the middle settings. Keep in ...