fan turns on and buttons work to control speed. reset and all other buttons do not work on control face says to perform cleaning but reset button will not work to reset i would like to know this one! ...
...button, the "replace plate" pops back up. So every time I reset and turn off and turn back on.. only the fan is running. Does the sanitizer and air purifier automatically come on when I turn it back ...
Question about Air Purifiers
...fan light flashing on two fans and won't stop. I did reset. It is a Winix 5500-2 Resetting Filter Life: After replacing your True HEPA Filter, place the Pre-Filter back in and close the Front Panel. ...
...button on the top, if not what you need to do is shut it off and then unplug for about 5 minutes. somtimes the fan might be dirty or clogged so i would check that as well and make sure nothing is ...
fan isn't moving the air. 1) Is there a fuse that you can check to see if it's blown? 2) Have you tried resetting the Filter Life Indicator button? 3) Is it still within warranty? The instructions for
...light!! Hope this helps yall! I just wish I knew exaclty which thing fixed it. turn unit off. Hold the power button & fan speed button for 10 sec. release both than turn it back on...
...fan does not come on. what can i check to see if it is suposed to work? There's a reset button on the bag of the unit, as well as a replaceable fuse (if necessary). But before trying all of that, ...
Question about Air Purifiers
button is set to the "ON" position. Unplug the power for 30 minutes. Plug the power back in and try operating the heater again. This will reset the internal sensors. Some heater models are designed to
fan doesn't. Is there a reset button that needs to be reset? Or something else to do? Sometimes you have to give the fan a push with your finger. If that didn't work, check all connections, fuses, etc
1 questions posted
Usually answered in minutes!
20 Questions
10 Questions
2 Questions
3 Questions
2 Questions