EnGenius ECB-3220 "bridge" Questions

How do I find out what the ip address of the bridge so that i can access the setup page? wire the bridge into the ethernet port on your router. access the setup page of your router and check the DHCP ...

wireless bridge set up need to set a wireless bridge Login to the bridge to configure connection to the router.

How do I access the setup page of this bridge? wire the bridge into the #1, 2, 3 or 4 port of your router. access the setup page of your router and go to the DHCP client table. Take note of the ip of ...

D-Link 2000AP+ and 2100AP Bridge configuration We have a bridge network using 2 Access Point D-Link 2000AP+, now one access point is out of order, therefore replaced with a new D-Link 2100AP, but ...

aironet 350 series wireless bridge Can anybody help me my wireless aironet 350 series bridge getting reply very high reaches up to 4000ms, and all configuration are okey, this happen only this week. ...

...not a cable, antenna, interferance, channel, issue and this happens with any 1310 cisco or wet54g bridge. I think it is a compatibility issue as they will associat to a cisco 350 series bridge and ...

...it tries to find the device. setting this up would be easy if you do it manualy. Just wire the bridge into your router, access the setup page of your router, go to the DHCP client table and take ...

can the wet610n wireless bridge connect to a 2wire gateway 2700hg-b? yes, there is a option for bridging the 2wire

i have a viprr d600.1 how do i bridge it Question is, why would you want to bridge it? Bridging is useful when you have a single band router/modem which you have another router you would rather use Wi

how to reset Cisco Aironet 340 Wireless bridge? I have Cisco Aironet 340 series-wireless bridge, it's for long time not use and i forget the password. I want to reset the setting to default factory, ...