Gemini XL-500 Turntable "tonearm wiring" Questions

...in one channel caused by the phono cable breaking at the clamp underneath.this can be replaced.tonearm wire faults can only be fixed by tonearm

...hope of fixing the connection of the right channel. This did not remedy it, however, i raised the tonearm section via the collar around the base and the lock switch. Now both channels work again.

...that are inside? please help me once you soldered to circuit board place - this might help Advanced Tonearm stuff Tightening the suspension on your tonearm Some TT's have tonearms which seem to be ...

...if they dont move it's the phono plugs if the does move it's the cart. You might also have a bad tonearm connection - make sure your headshell is securely in place. Also take a look at the tonearm ...

...Tonearm wiring is tangled under tonearm. Cheers john, Stylus City. In the solution above, I'm afraid to say, there are no electronic sensors of any kind. Nothing like that existed 40+ years ago. If ...

...near it. I changed the RCA & ground wires and I still have this problem. I need help :-( This is a tonearm issue. Your tonearm probably has a loose ground connection, or if you moved it recently,

rewiring tone arm stanton st.150 Nice , i just received my tonearm wire for a technics. mk5 First question , Which tonearm are you try to put in and why, since if you want a better sound , sell the ...

...there is a problem wth the wiring from the tonearm i would check that all your connections are firmly sodered in place it sounds like there is just a loose wire that is losing its ground

...wiring from the arm attatches to the rcas etc. You have very little to loose in trying to fix what you already have. Well, if you already replaced the RCA cables, the only other issue will be either ...

I had to replace the tonearm in a technics 1210 mk5, and i cut one of the wires too short, and i wanted to know where can i get the internal wires that connect from the needle to the circuit board, ...