Samsung SlimFit TX-T2782 HDTV "programming tv antenna cable" Questions

...tv, how can i get channels after 13?? channels 13- 41 are in red on the screen . how can i prograk like 2-13? In the menu, find antenna/cable. Locate cable and program from there. Go into menu mode. ...

programming this tv was originally hooked up to a satelite and worked. we have directv. the antenna cable is hooked up but when i try to program the channels no channels are found. After it is done ...

...antenna) 1 Press to turn on the TV. The Initial Setup screen appears. 2 Press on the remote control or on the TV front panel to start Auto Program, or press to exit. To perform Auto Program again 1 ...

...to pick up weak over the air signals when having the cable input selected and a "dead" cable connected to the TV. The cable itself will act as a weak antenna and pick up some broadcasts

Programming method First connect the TVs antenna socket at its back with external antenna or cable. * With the remote control in hand, press the POWER key to turn on the Presentation TV. ** Press MENU

...tv has cable channels 2-13 only. Lost original remote. Using a universal remote. Tried to auto program. It started scanning but when channel 14 came around, just fuzzy snowy picture all through the ...

...TV without a remote control. Fist connect it to an external antenna or cable whatever may be, to its antenna socket at the back side. After you have finished connecting your TV, you can use Auto ...

...make sure the cable is connected. Secondly, press menu on the remote and go to auto program. Select if you have cable service or an antenna and the TV will begin to program the channel

...tv's have an Antenna mode and a cable mode. If you have cable tv service, the cable mode must be selected in order to receive channels higher than 23. Then you must auto program the channels thru the ...

...TV setting from "antenna" to "cable." There is no menu selection on the TV itself. Is there any way to do this?" You would need to purchase a universal remote, and once you program the universal you ...