...happens when the machine is used with the transit bolts in place is it vibrates alot, and possible moves about. Remove the bolts as soon as possible and it should be fine. I put on a load and the ...
...happens Is the power cord plugged into a grounded 3 prong outlet? Plug power cord into a grounded 3 prong outlet. Are you using an extension cord? Do not use an extension cord. Has a household fuse ...
...shipping bolts were possibly not removed there is 4 hole in the rear of the unit 2 on top and 2 on the bottom , or your damper shock may be faulty or came off this can happen when overloading, or you ...
...out fine without clothes in it, but is walking moving around floor when clothes are in it. How can we stop this from happening? Did you read the manual and remove the shipping straps and / or
...shipping bolts, spacers and the power cord are removed. 2. Unplug washer or disconnect power. 3. Check drive motor tachometer resistance. It should be approx. 115 ohms. 4. Check wire harness ...
...without the headache. Have you made sure that all the shipping bolts and stuff were removed? this happened with our Bosch and we found out we had kept three bolts installed that needed to be ...
...shipping bolts, spacers and the power cord are removed. 2. Unplug washer or disconnect power. 3. Check drive motor tachometer resistance. It should be approx. 115 ohms. 4. Check wire harness ...
bolts on the back are loose now and the bottom 2 are still tight. The top 2 appear broken and not connected to anything. If you can help-Please tell me what happened and what I can do to fix it. those
...shipping. Mine would bang and shake all over. I got the book out before I finally figured it out. I had to take the back cover off and remove the bolts and plastic braces over them. They look like ...
205 questions posted
Usually answered in minutes!
196 Questions
47 Questions
55 Questions
45 Questions
52 Questions
