Amana ALW480DA Top Load Washer "agitator keep falling" Questions

...agitator keeps falling off. I am able to put the agitator back on , and I tighten the bolt but it keeps falling off. Also, during the spin cycle it make a knocking noise. I tried redistributing the ...

agitator keeps falling off The agitator keeps falling off. I have to screw it back down before every load. I'm thinking the bolt is stripped, but it looks fine. I'm hoping that I don't have to replace

kenmore 70 series washing machine agitator mover keeps falling off problem plastic tabs on agitator are breaking off: Have you tried replacing the agitator?

...Agitator keeps falling off during spin cycle. screw is there, can't get to it without taking it apart. Don't know how to take the agitator aprt. simply reach under the base of the ...

agitator? What holds it and what tool do I need to remove it? Also, should I replace the cam and any other parts while I am in the neighborhood? take the disp out, remove the inter cover, take out the

...agitator. What holds it? Also, should I replace the cam while I am in there and are there other parts that I should replace while I am in the neighbohood? Thanks. take the disp out, remove the inter ...

keep them in place I can't get the connection to snap together is there a trick to re-assemble the agitator? I thought the two parts would snap/connect together. They don't. Put the agitator on upside

...keep at it), then, with a long pair of needle nose, place the bolt you removed back in the hole. Take your extension with socket, hold the bolt firmly, and slide the auger back on to the top of the ...

...agitator at the same time to keep it from turning. Now, not knowing what your agitator looks like, it may or may not have this set up (just a thought for you try). If there is no mounting bolt of any ...

keep it from flying off during a wash cycle? The agitator is loosened from a bolt underneath the wash basket. Do not try that or you could damage the washer. Only a repairman or someone who has worked