Question about Williams Heating & Cooling
williams wall heater, lite pilot and heater comes on okay, but will only come off when I disconnect the thermostat? If you have to disconnect the thermostat wire at the gas valve then it is either a ...
Question about Fahrenheat Heating & Cooling
heaters and thermostats. I have even bypassed the thermostat and hooked up the 12/2 wiring directly to the baseboard heater and still no heat. I have moved the 20 Amp breaker on the sub-panel. Nothing
Question about Cadet Manufacturing Heating & Cooling
A friend disconnected there Cadet baseboard heater model BTF1. They cant get it to go back together without blowing the breaker. They didn't label how it came apart. How do you integrate the hot and ...
...THERMOSTAT TO THE HEATER. FIRST DO YOU STILL HAVE THE MANUEL TO THE HEATER ? THE WIRING DIAGRAM SHOULD BE IN IT. USALLY ITS ONLY A TWO WIRE HOOK UP UNLESS IT HAS A JUST FAN CONNECTION ALSO,THAN ITS A ...
wiring for baseboard heater wondering how to wire heater have 12-2 to t-stat from panel and then have 12-2 to baseboard unsure of what goes to what thanks for any info. I hope you are using a Line ...
...thermostat wiring. Inspect the wires for cuts where they come thru the wall and go thru the furnace. Most common places where the wire gets cut or pinched is where it is feeding thru the heater ...
.i need to know how the 3 wires are hooked up. Mains wiring is dangerous and can kill you if you do not know what you are doing. For your safety I suggest you get a electrician to wire up your heaters
Carrier 58SXC heat always on While changing thermostat to a smart one a problem happened. Heater and fan is always on even without any thermostat hooked up and wires hanging free. Is there an ...
I have a heater and when I turn on the thermostat it does not turn the heater on Maybe the thermostat is bad. Try running a jumper wire between the 2 wires of the thermostat to see if the heater turns
the pilot goes on and stay on but heater doesn't the thermostat its ok Take the two wires going to the thermostat and cross them. If the unit starts, you have a bad thermostat. If it doesn't, at the ...
9 questions posted
Usually answered in minutes!
11 Questions
14 Questions
3 Questions