Procom 10K BTU, Vent Free, 2 Plaque Infrared Space Heater, Natural Gas Infra-Red Patio "clean gas log pilot light" Questions

...gas. 5. Remove logs. and the rear left support plate to access pilot unit screws 6. Take out pilot unit screws so you can access the pilot stack with your 7/16 wrench. 7. Remove the pilot stack. 8. ...

...thing. Unless you want to get a sniffer to locate the issue, If could also be the pilot pressure is too high and the pilot is not burning all the gas. You may want to call a pro due to explosion

gas log stove works well except it will go out on its own then I have to relit pilot . It does have some age on it. I have taken file boared to clean tip of therm coupler and just tap on it and it may

...pilot light won't stay lit. From what you're describing, either the Thermocouple needs cleaning or it needs replacing, However, these are not easy units to work on for a Do it your-selfer. so I would ...

...gas logs is a dirty pilot orifice that causes a lazy yellow pilot flame. So when the burners cycles off, the additional heat from the main burners no longer helps heat the thermocouple, so it cools ...

...clean the unit as directed ... try lighting the pilot and the burner briefly, before reassembling. If everything works as designed, you're back in business. Keep in mind that Vent-Free Gas Space ...

...Gas log Stove? If it's vent-free, the Oxygen Depletion Sensor (ODS) which is part of the Pilot needs cleaning. As, it may be clogged with dust, lint & pet hair and it's sensing that there is not ...

Burns for a few minutes but when when it goes off the pilot light goes out. flame sensor is bad or dirty. You can try cleaning it with a piece of emery cloth or sand paper.

gas company, they will service it for you. You would need to have specialized equipment in order to clean the orface properly without damaging it. Good luck -------PLEASE CLICK ON 4 THUMBS UP 4 ME----

...light area to tha gas valve. It feels the heat from the pilot and keeps the gas valve open for gas to flow to the pilot or to the logs when in the lit position. Without the gas valve will stay