Whirlpool Cabrio WTW6600SBT Top Load Washer "stop sensing" Questions

...to wash - sensing light came on, filled with water, tub did not move, red light on wash cycle and stopped. Tried again today, sensing worked, tub rotated this time, wash cycle light came on (green ...

during spin cycle it becomes unbalanced and it beeps and stops during spin cycle it becomes unbalanced and it stops. A repairman replaced a lots of things but it keeps on doing the same thing. How do ...

my Whirlpool Cabrio top loading washing machine stops with an error OL . nothing wrong with the loading, this is only a small whash. Where is located this sensor for overload? The sensing is done by ...

error on control panel "oL" error on control panel "oL" This happens when the washer goes to spin cycle on regular wash, and the washer stops and will not spin, but if short cycle the washer

...sensing. any thoughts on what to do next? thanks Hi from retired Englishman in SW France, If you have checked that the hot and cold water taps are turned on fully and the hoses are not kinked or ...

turn on washer and lights come on and sensing light and lid lock comes on then just clicks then it stops clicking and the lid lock light goes offthen all lights flash like if u pause it and it never ...

...water it will not spin at all or at least not properly. There also can be others problems that will stop or slow down the spin, but the water not draining is the most common one. So, if you are stuck ...

...turning back and forth with the C6 diagnostic indicated. After about 7-8 minutes of this it stops and displays an F72 code (basket re-engagement failure). I opened it up and checked the wire ...

...or with only the Clothes Clean or Done indicator on). Select any one button (except POWER, START, STOP and PAUSE/CANCEL) and follow the steps below, using the same button (remember the button): ...