...replacement glass lid and it broke within the first week. Terrible design! They are using double sided tape to hold the glass to the hinge. There is too much spring tension to be held with tape. Way ...
Question about Whirlpool Cabrio Washing Machines
I want to replace lid on my cabrio model wtw7800xw2 with a solid lid frame on glass lid keeps breaking If all you want to do is to replace the lid, there are two TORX 15 screws on each side. Undo ...
...If the rear lid trim has come un glued from the lid and the lid is very flimsy, than the entire glass lid needs to be replaced. These retail for about $215.00. Pleazer
Question about Whirlpool Cabrio Washing Machines
glass is broken. I have the replacement part but do not know how to get access to the lid mounting. Any help?? do you see about 2-4 inches down a crease that runs all the way around the top? there are
Question about Whirlpool Cabrio Washing Machines
...top section. 3. The top will actually fold back leaving the inner tube fully exposed. Support the glass lid so it doesn't get damaged because it is very heavy and will fall open when you flip the ...
Question about Kenmore Washing Machines
kenmore elite washer keeps giving me the LE error Kenmore elite 700 series triple action technology glass top load 5.3 cu ft.washer glass lid is shattered..can I replace the glass only or do I have to
Question about Whirlpool Washing Machines
...have a Whirlpool Cabrio WTW7800XL2 Grey! The lid has completely cracked and broken in half (not the glass just the plastic/metal frame) I want to replace the lid with a non glass frame. Some help ...
I need to replace the glass lid This is the cheapest lid that I've found online: http://preview.tinyurl.com/washingmacinelid I didn't find any part numbers for just the glass. Good luck.
open. is it the control board? or the water control valve? How can we check these? There is a small glass fuse on the left inside the front panel. Replace it
Question about Whirlpool Washing Machines
I have a whirlpool cabrio the lid is cracked glass is up from the lid I read were it is a defective and won't replace washer or a refund it also say ul Hi Angela, you should contact Whirlpool directly
3,787 questions posted
Usually answered in minutes!
57 Questions
48 Questions
24 Questions
12 Questions