JVC AL A158BK Turntable "removing spindle" Questions

...spindle due Rotel RP-830 Turntable -removing the platter - It is stuck on the spindle due to age and I do not want to damage the bearing while trying to remove it...Any suggestions It's a tight fit - ...

How to remove Platter on JVC L-A120 Turntable I'd like to change the belt, but cannot remove the platter. Videos of similar models show the platter simply lifting off. there is no clip either. Hi Jeff

dont know how to put on the belt for my emerson turntable m-266oa turntable m-2660a emerson turntable belt- i dont know how to install it Merely take off the horseshoe clip from spindle(under rubber) ...

How do I remove the spindle to get at the drive How do I remove the spindle on a Crosley turntable? I need to get at the drive belt which keeps slipping. this video answers that question for most ...

How do I remove platter? belt has slipped off platter and pulley If this turntable is typical of its type, first remove any clip which may hold the platter to the spindle (f there is no clip, ignore ...

I have a Fisher MC-712 from the 80's. It was playing slowly so I knew the belt was probably worn. I removed the platter to find the belt lying there. I know most platters have an access hole to ...

grating noise If this noise happens when the platter rotates, remove the platter and slowly rotate the center spindle. The bearing may be bad or the entire spindle may be loose. For more information, ...

Zenith turntable I suspect this is not a belt drive turntable. So to solve it you need to remove the matt from the platter and look at the spindle in the middle. It might be covered with something ...

fisher turntable mc-715 has power but table won't turn. it's able to move manually. What's likely is that the belt that drives the turntable has snapped. The MC-715 is a mid-late 80's model, so the ...

How do I remove the Numark TTX platter I have the well documented platter speed problem. I have new drive chip BUT I can't see how to remove the platter to get the backside of the motor board. So far ...