Question about Royal Office Equipment & Supplies
...checked the fuse and it is good. Cleared a paper jam and still wont run forward or reverse. If motor wont run at all then probably the pcb is blown...call Royal at 1-800-524-0799 for parts and
Question about OfficeMax Office Equipment & Supplies
my OfficeMax shredder OMO 1288 wont stop running! my OfficeMax shredder OMO 1288 wont stop running! your auto insertion sensor (electric eye) is probably dirty or malfunctioning. clean or replace the
wont do anything do you mean that the motor dosnt run??? or that it runs but dosn't shred paper.??? In either case you have either broken gears or defective pcb related components...contact Royal at 1
...I have made sure there are no jams and it still wont turn on. Any advice? If it wont run forward or backwards then probably the pcb inside is fried...call Royal at 1-800-524-0799 for parts
Question about Royal Office Equipment & Supplies
...motor wont run you have probably blown the pcb inside; or even if it runs in reverse but not forwards you have still probably fried the pcb...give Royal a call at 1-800-524-0799 for parts and
Question about Royal Office Equipment & Supplies
My just runs when u turn it on can this be fix sure,smash it then it wont run when you turn it on
...every visible paper jam but still nothing. HELP! If it wont run forward but does run in reverse you may have lost the PCB inside.... contact Royal at 1-800-524-0799 for parts assistance and
Question about Staples Office Equipment & Supplies
staples xpl 200d shredder turns on and runs, but teeth are seized up, running in reverse wont fix it Paper is jammed in teeth. Have not had any problems with it and have used the lubricating teeth ...
Question about Cross Office Equipment & Supplies
I have a SX102M paper shreder that wont shrede the shreder wont shrede when you insurt paper however it will go in reverse the green light goes off when the paper tuches the switch It's the paper ...
run all the time when power is applied. Just below the paper insertion slot, there is a micro switch.... that probably is the culprit, and is stuck ...there is a tiny spring in that switch, and may be
204 questions posted
Usually answered in minutes!
6 Questions
2 Questions
3 Questions
1 Questions
1 Questions