OfficeMax 0M96431 Shredder "forward work reverse" Questions

work. did you try to fix the forward problem by oiling it? That would be my first choice. The Forward and reverse switch would be my first thing to check to make sure the switch is working. Next would

Shreder works in reverse but not in forward. Royal ht500a Shredder works in reverse but not in forward. How can this be fixed? Thanks, Hello, Check in opening and see if paper switch is stuck.

...Reverse is forward, and forward is running in reverse. If someone worked on it they may have reversed the wires from the motor to the board. There are four wires from the motor, of the four one goes ...

...forward function work? I was able to figure out the solution for this by taking apart the shredder.My model is a TX61B. There is a piece of plastic that is attached to an internal sensor. You can see ...

...every visible paper jam but still nothing. HELP! If it wont run forward but does run in reverse you may have lost the PCB inside.... contact Royal at 1-800-524-0799 for parts assistance and

work in reverse and not forward. I removed the 6 screws on the bottom thinking that I could take off the top from the bottom and remove any more jammed paper. There must be some kind of locking device

...work with the paper sensor. When you select the Forward function the Auto Start is taken out of circuit and the Forward switch should supply the motor After all of that I would say that the switch is ...

work going forward only in reverse Paper shredder doesn't work going forward but it does work in reverse only. sounds like you have a sensor problem. is it automatic reversing on jamb? if so sensor is