OfficeMax 0M96431 Shredder "apart" Questions

Plastic got in shredder won't work,would like instruchions to take it apart to fix instructions on how to take apart to fix Take out the paper bin. Look for and remove any screws holding the top part ...

How do you take apart the AS662C shredder? I have How do you take apart the AS662C shredder? I have the screws out but I can't get it to come apart? There is one more screw under the warrenty void if ...

The red light stays on and the shredder won't work Unplug the unit take it apart 7-9 screws on back , gently pry it apart , probly dirty as heck in there or somethings jammed in there, also clean off ...

...of paper. sounds to me like you have a gear going or already gone out. You might want to take it apart and check out the gears. It's not to hard to take them apart or put them back together. Just ...

...It will go backwards not forward. I cleaned as much of the stuck label.. not sure how to take it apart or the best way to adress this. Can you help me? thanks loads,Joanne Eldridge Probably the ...

...up and clean it out??? Depending on make and model the cutting head section will either come aparts with some screws or plastic clips that hold the top plastic cover on......once apart you may ...

...the left accepts it. I've lost my manual. I think I could clear it if I could get the top off and apart, to expose sensors and grinders, but can't figure out how to get it apart. Will welcome help! ...

How do I reassemble On/Off switch? I had a bad jam in the blades. I took apart cleared jam OK. My problem is the on/off switch came apart from the interior of the lid. Now I have two very tiny clips ...

...have a fellows ps60c-2 shredder and after I removed the seven screws I could not get the powerhead apart. I need to know what is holding it together yet. It also is shredding on the left side but