Question about Sewing Machines
...thread keeps getting wrapped around bobbin case on LX-3125 When I lower the needle to pick up the bobbin thread, the top thread keeps getting wrapped around the bobbin case. I have looked on ...
...thread around the bobbin and binds the machine up. The shuttle hook is suppose to hook the needle (spool) thread and loops it around the bobbin case to form the lock stitch. Is it possible that ...
Question about Brother Sewing Machines
...THREAD WRAPPING AROUND THE BOBBING CASE AND DRAGGING CAUSING THE TOP THREAD TO BREAK ? I've tried several bobbins tried new needles rethreaded machine can't think of what it could be , the top thread ...
...thread wrapping around bobbin case. Not sure of the exact model, I inherited this machine. The needle thread goes in, gets picked up, and makes the loop. Sometimes it picks up the bobbin thread, ...
Question about Elna Sewing Machines
thread keeps wrapping around the bobbin case. What can I do I have cleaned bobbin case and re inserted correctly try changing the needle, make sure the machine is threaded correctly,using every thread
...itself and jams up You may have the wrong bobbin in the machine. If it sticks up out of the bobbin case the upper thread will wrap around it. This would be for a top loading machine. What model is
...thread when wrapping around the bobbin thread catches on the bobbin and causes and major tangle around the bobbin. It's as if the bobbin lifts up and that's why the needle thread is continuously ...
Question about Singer Sewing Machines
...thread wraps around the lever on the bobbin case and the bobbin case moves eventually. Singer 7258.CL Remove your bobbin case and inspect it for any damage. Scratches, holes, snags. Sometimes you can ...
...wrapping the end of the thread several times around the bobbin in a counter-clockwise motion? Have you made sure to "scoot" the empty bobbin next to the bobbin bar to the right? Is the thread going ...
Question about Brother Sewing Machines
...thread wrap around the bobbin housing then be deposited into a slot in the under side of thee arm holding the bobbin housing from turning, staying in this slot after the next thread is deposited, and ...
152 questions posted
Usually answered in minutes!
84 Questions
19 Questions
22 Questions
17 Questions
9 Questions