bobbin thread. I've followed the instructions and the needle comes in and out but won't catch the bobbin thread. Then, when it did draw up the bobbin thread (I have no idea what I did differently, but
Question about Sewing Machines
...bobbin thread it seems to get stuck around something and will not draw up the bobbin thread. Has anyone had this problem before? Can you help me? My bobbin is installed correctly and so is the bobbin ...
bobbin case making sure the thread feeds clockwise. Draw the thread through the slot on the case. Continue to draw under the tension spring and through the opening pulling out about 6" of thread. Hold
Question about Singer Sewing Machines
...thread the bobbin on a singer simple sewing machine how to thread the bobbin Drop-in bobbin: Note: thread must change direction when entering bobbin shuttle notch. Usually bobbin will turn ...
...Thread and Bobbin Thread I was smoothly sewing until the bobbin thread was tangled. I pulled out the bobbin case and removed the tangled thread from within. When I am trying to start sewing again, I ...
Question about Juki Sewing Machines
bobbin thread, too loose, as shown in the middle drawing at right. When the needle threadshows on the wrong side, the needle tension is too loose or thebobbin thread, too tight, as shown in the bottom
...bobbin thread does not drawing up Have you tried flipping the bobbin in it's case, so that the thread comes off the top of the bobbin instead of the bottom. Some machines are sensitive to one ...
...bobbin case (thread should feed clockwise) 10. Draw the thread through the slot in the bobbin case 11. Continue to draw the thread under the tension spring and through the opening Pull out about 4"' ...
...bobbin thread won't draw up and so it won't stitch at all. It was sewing fine and then it got bunched up on bobbin thread while making a buttonhole. When I got the tangle out, it stopped making ...
Question about Sewing Machines
...bobbin thread up to the top? Install a brand new needle. Remove the thread. RAISE the presser foot and rethread from the beginning--allows the thread to seat completely in the upper tension disk. ...
152 questions posted
Usually answered in minutes!
84 Questions
19 Questions
22 Questions
17 Questions
9 Questions