Mr. Heater Suspended Garage Heater "replaced honeywell thermostat fan stays" Questions

...honeywell Thermostat reaches the heating temp. but the fan will not stop running.And yes the fan is set to auto.It just keeps running and running and running.It stays the same temp but will not shut ...

...replaced the old CHT18-60 thermostat with a Honeywell RTH2310. Now the heat and fan stays on constantly (regardless if in the programed mode or bypass or no matter what the temp is set at). You can ...

...replaced with another. This one is even worse than the other. To get the furnace to come on the house temperature on the thermostat reads 62 degrees when it is actually 66 and to get the furnace to ...

...Honeywell on it. Either way the control will need replacing. The other type of fan control is a solid state control board. This will most likely be located in the indoor fan compartment. It should be ...

...honeywell gas suspended garage heater will not come on when the t'stat calls for heat. It is a heat only unit and neither the fan nor the blower motor will come on. The Heater is getting power to it ...

Honeywell Old T874D1512 dual heat/cool thermostat Dual heat/cooling mercury-2 controls with an automatic setting on each side--when I set the heat to come on the unit will not react--I can set the ...

Honeywell programmable thermostats for zones 1 and 2, and a manual thermostat for zone 4. At night, the temperature for zone 1 (downstairs) is programmed to drop from 66 to 62 and zone 2 is set for 66

...replaced the fan relay with a new one and it fixed it for a while but it's doing it again, sometimes. Could something be taking out the fan relay or is it in the t-stat or t-stat wires? no the older ...

...thermostat for Cool, Fan, or heat, it stays on. If it is on Cool though, the A/C will come on, but the heat stays on with it. I got a new thermostat, I'm sure it is hooked up right, I have looked ...