...loose stitches of bottom stitches adust the top tension one letter or number higher and sew on a scrap piece of fabric till stitches look correct,, here is a free manual ...
Question about Husqvarna Sewing Machines
...close when the presser foot is lowered. If the stitches are loose on top it could be that your bobbin tension is too loose... If the stitches are loose on the bottom it's usually the top
stitches are very loose . Where do I go to tighten then tension for the under part of the stitches. Actually, the majority of recommendations are incorrect. If the bobbin thread is loose, it's because
Question about Brother Sewing Machines
...stitches on zig zag with loose stitching underneath fabric Straight stitching is fine but missing almost every other stitch on zig-zag leaving a long loose pattern. try changing the needleadjust the ...
...bottom thread the stitches are too loose? if stitches on top is loose then remove bobbin case and tighten small screw on it. if stitches on bottom of fabric is loose then tighten top thread
...loose stitches underneath your sewing, it usually means that the top tension needs tightening. Write down where your tension disk is before you turn to a higher value, then sew. Keep doing the above ...
Question about Sewing Machines
...loose stitches without having to start over?Loose on the left hand border. I now how 6 by 4 foot . Just learned how to crochet 3 weeks ago by watching a video. Help !! There is no way to change the ...
Question about Sewing Machines
loose stitches under work what am i doing wrong my machine is the disney pe180d embroidary stitches are very loose under my work can you please tell me what to do thank you Use a brand new needle that
...stitches are all loose, forming little loops. Is there anything I can adjust to sort this out? Thank you Cath Graham I found a screw on the bobbin case (where you put the cotton for the underside ...
...stitches is loose you have to reduce the upper thread tension, if the bottom stitches is loose you have to increase the upper thread tension. Adjust accordingly till you can get a perfect straight ...
27 questions posted
Usually answered in minutes!
125 Questions
116 Questions
88 Questions
79 Questions
49 Questions