Singer 3116 Simple "sewing machine side knob" Questions

...sewing machine. I was able to remove the frozen stitch length regulator on the sierra nelco sewing machine. It is moving freely now, but now I can't reinstall it. To reinstall the stitch length ...

sewing machine. To reset the stitch width knob, you will need to follow these steps: Turn off the sewing machine and unplug it from the power source. Locate the stitch width knob on the machine. It is

...sewing machine that was working 2 years ago. It is now stuck in reverse.the stitch selector knob will not turn either. It will sew in reverse. how to free up the button and knob. Stitch selector knob ...

...straight stitch. The needle appears to be off to one side. when a part on the sewing machine does not respond like it's suppose to ,,then it would be a good idea to have the sewing machine ...

...sewing machine by turning it  oward you.2 Place a spool of thread of your choice on the spool pin located toward the back of the sewing machine.3 Pull thread from the spool through the threading ...

...sewing button stuck HELP!! Model 6430 Viking has the reverse button located in the center of the stitch length dial. It is firmly jammed in the reverse position causing the machine to sew ONLY in ...

...sewing machine model 158.12271 is locked. When I loosen knob on right side of machine, as you would to wind bobbin, everything spins. When I tighten knob....nothing moves and motor is straining. Any ...

...wont turn all the way the turn knob on the right will only turn a little That's something physical. Shake it a bit without breaking it or open the sewing machine if you feel confident enough to do

...sewing machine. When I press the foot, the needle does not move up and down. When I tried to move it manually, the knob won't move. Any ideas? I had that problem too! I usually turn the tension knob ...

...sewing machine On the Bernina 830 Record (older mechanical model), it is usually the very bottom knob on the right side (directly below the Stitch Length Lever). It should turn right or left about a ...