...reverse. When I thread the needle, the material starts to bunch and the stitches on the underside of the material has loose loops. try a new needle try a different thread top and bobbin try adjusting ...
...reverse. try this The machine is not threaded correctly--rethread the machine The thread tension is to tight--reduce the thread tension (lower number) The thread is to thick for the needle--select a ...
...reverse. When threading up any sewing machine make sure the foot is 'up' as this opens the tension disks and the thread goes between. when you lower the foot the discs close around the thread and add ...
Question about Riccar Sewing Machines
...needle up but when it is suppose to reverse and go back down it seizes. Remove the thread, the needle and the bobbin case. Run it full speed for 1 full minute. Replace needle, thread and bobbin case ...
Question about Sewing Machines
...reverse stitching, that may be a machine problem needing professional service.
Usually, bird nesting results when the upper thread is not firmly seated in the tension disk. Be sure to Always ...
...needle thread Check the thread coming out from the bobbins maybe on reverse side,also check the bobbins tension adjust it there is a small adjusting screw.Check also the needle alignment lastly check ...
Question about Bernina Sewing Machines
...reverse) Yes the bobbin was threaded through the finger of the bobbin case. Needle breaks 1.the needle is damaged 2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong ...
Question about Singer Sewing Machines
...reverse, it may be due to a few issues: Thread tension: Make sure your thread tension is not too tight, which can cause the thread to bunch up and jam the machine. Try loosening the tension slightly. ...
needle. But every time I go in reverse it makes this horrible grinding noise and then the thread starts to cut? What am I doing wrong. It did great until I swictched material. the fabric & thread
Question about Juki Sewing Machines
...or the tension? Let me know. . . .Deb the material movement is set by the forward/ reverse knob or lever not picking up the thread can be needle thread tension too loose it can be needle hook ...
915 questions posted
Usually answered in minutes!
564 Questions
372 Questions
252 Questions
263 Questions
235 Questions