Singer 3116 Simple "needle broke" Questions

...needle broke the needle broke, so replaced and such. The problem that won't go away is the upper thread continues to break after 10 stitches. it looks like it breaks at the needle or before set 5 of ...

...needle broke whilst sewing using my Brother machine and now the machine will not work it appears to have jammed ? check to make sure that all the broke needle has been removedmake sure there ...

...needle broke on my serger and i replaced it and now wont make stitch. please help the thread only cameout of the main needle that broke and i rethreaded it to manual instructions. the threads are not ...

broke the newer needle. Needle breaks 1.the needle is damaged 2.the needle is not correctly inserted 3.wrong size needle for the fabric 4.the wrong foot is attached 5.the needle clamp screw is loose 6

needle broke and i changed with the same number now it is not picking up the thread and does not stitch you said the needle broke, did you check in the needle plate where the feed dogs are if there ...

...broke a needle while sweng,now my needle hits my bobbin case on my 2030 I was sewing a tarp, and my needle broke, after replacing it & re threading , the needle hits the bobbin case as i was ...

...broke. I was sewing and the needle broke, when I replaced the needle it broke again. I realized the needle is hitting something inside. The machine has been knocked out of time. Take it for

...broke a needle and tried to replace both needles. Now I can't get my machine to chain. I have rethreaded it, and replaced the needles, closely following the manual and threading guide but still I ...

...broke a needle on my Kenmore sew machine 385 17622090 I installed a new needle but now my bobbin thread won't catch. Very frustrating possible that when the needle broke ,the needle/hook timing was ...

...needle broke with each stitch the machine makes a loud clacking noise. Needle broke after one stitch. Needle breaks 1.the needle is damaged 2.the needle is not correctly inserted 3.wrong size needle ...