...bobbin case fell out...can you help? I have the screw but cant work out how to fix it. The machine is a Janome Look in the bobbin area to see where the screw fell out. Check your manual. Sometimes ...
...bobbin area making sure that it clicks into pplace If the bobbin case(holds bobbin) fell apart due to force it is likely needing to be replaced. Go to SewingPartsOnline.com to order a new
Question about Sewing Machines
...bobbin wouldn't go into the the cradle then the 1/2 moon part fell out followed by the complete circular part. Hel me put it back together please. Valerie Those parts are meant to be removable for ...
...bobbin area a metal part fell out. I don't know the name of it, and the manual doesn't list it. I need help installing it back in the machine correctly. You didn't state what model you have, and that ...
Question about Simplicity Sewing Machines
...bobbin mechanism fell out when I opened the bobbin area door I was sewing and the machine just stopped stitching. I checked out the thread on top and the needle and everything looked fine. When I ...
then tilted the machine and the needle fell out. The screw is located on the rear of the sewing machine, right behind the bobbin compartment. A flat head screw is also needed to "Pry" open the plastic
...bobbin thread While I was sewing, using the feather stitch, the needle came loose & fell out of place. I changed the needle and when I continued to sew, the top thread won't pick up the bobbin ...
Question about Janome Sewing Machines
...fell down into the bobbin area. Needle did not break off. I took off the plate and manually tried to move a new needle and shaft up/down. needle is hitting something If you did not get the old needle ...
...fell through the plate Take your bobbin case out and clean area with a brush, make sure that all of the needle is out of that area. Your manual will show you how to replace the needle. If, you cannot ...
Question about Sewing Machines
...bobbin area fell out and I don't know how to put it back. Any suggestions. Without knowing the make & model machine, we are basically unable to assist. Probably, the best thing you can do is ...
915 questions posted
Usually answered in minutes!
564 Questions
372 Questions
252 Questions
263 Questions
235 Questions