Singer 3116 Simple "adjusting tension bernina machine" Questions

...This will open the tension control. Set the tension to around 4 and then lower the presser foot to see if this helps. If not, you need a certified Bernina repair person to take a look at the

...adjusting bobbin tension. There really aren't any "specifications" other than adjusting it until the bobbin drop test is where it is normally recommended. adjust bobbin tension Google Search P.S.--be ...

...BERNINA Bobbin Tension How and Why Tension is Adjusted Understanding Bobbin Tension Understanding Thread Tension Threads How can properly adjust my tension Sewing Lesson 10 How to Fix Tension on Your ...

...tension Depends on your Bernina model. Some of the older mechanical models (830 Record, etc), the thread will wrap around a tension knob which you can turn right to tighten or left to loosen. The ...

Adjusting the tension setting doesn't seem to work. On the bobbin casing is a screw to adjust bobbin tension when upper tension will not solve the problem. Check your manual for location of the screw

bernina nova foot tension adjustment There is no presser foot tension adjustment on the 1008. Please restate the request as to why you would want to increase presser bar tension. SewTechnical Home

Bernina KL 117. How do I adjust the bobbin tention? The machine is very old with a modified electric foot peddle. I don't know where to adjust the bobbin tention as it is making a crows nest. By "crow

...Bernina Activa 240 and when I try the blanket stitch, it is bringing the lower thread up. I know this would normally be a tension problem, but it is on the standard #4 setting. I have re-threaded the ...

...Bernina 1300mdc. I am using the coverstitch. It is tunneling. I have adjusted the tension for the thread to no avail. Would it help to adjust the coverstitch tension knob? It might, but note how you ...

...Bernina's are touchy. Likely, the tension is off. On a scrap of fabric, (double layer) sew and check for balance between top and bottom stitches. Adjust until they are equal. You may need to adjust ...