Whirlpool GH7208XR Convection / Microwave Oven "work slightly pressing door" Questions

work I have a built-in oven/microwave combo. Number stamped on the back of the microwave is 3183566B. The problem started a while back with the motor shutting off on its own while cooking. Pressing on

...slightly. I hope this works for you. I was having the same problem and it turned out the door was just misaligned. I pulled up on the door until there was a click and then it worked fine. For others ...

...door open. At first one of the switches were sticking slightly giving you the attempted run. Then enough stuck to cause the safety to sense it. The safety usually will blow the internal fuse or house ...

work and heat up the food. But afterawhile that stopped working as a workaround. Then it suddenly start to run when the door is open and would stop if the door is closed. I disassembled the microve to

...work. After I close the door and set the time and start, I see the time countdown, but I don't see the microwave starting. I can get the microwave to start, if I keep pressing the top of the "control ...

...slightly The problem you're seeing is nearly always a result of a safety switch that is not being activated by the door. The result is that the oven thinks the door is not shut fully. Pressing the ...

door and/or lift it slightly, the microwave will cook. Of course, it's aggravating to stand there and hold the door. Do you have a manual and/or procedure for adjusting the switch? It should be just a

...work - however if we press on the outer skin near display and even slightly below the micro works as long as pressure is applied. Convection functions work fine. Any thoughts? Likely the door latch ...

slightly and helping with a flat tool. If the operation is done by the user there is an high risk to warp the door frame or the chassis, causing more damage. In this case I suggest disconnecting power