...FAN IN MY LIVING. I HAVE POWER TO EVRYTHING BUT IT WONT TURN ON. ITS SUPPOSED TO RUN ON A THREE WAY SWITCH ITS ALL POWERED FINE BUT MY FAN WONT TURN ON.DONT KNOW WHATS WRONG PLEASE HELP. 3 way ...
Question about Intertherm Heating & Cooling
...There is no flame sensor per se, unless it has an ignition type pilot. Only temperature activated switches employed. The limit switch to the left of fan switch is "Nordyne" part #626259. This
roll out switch default i have a new bryant package unit installed by our company! Have a led light code calling for roll out switch fault!! with switch bypassed combustion air comes on with no blower
Chain switch to cut fan on and off popped out. How can it be replaced Hi!! Get a replacement Pull Cain switch, cut power to fan unit, remove the two or three screws holding the switch housing and pop ...
There is a switch on my 1 1/2 ton Ruud furnace/Air handler that is not working properly. The unit would not turn on, even though the thermostat was working. I took the panel off of the air handler and
Information needed: Celsius WF-604 Air Cooler - Their are 2 Push Button Switches on the cooler the: The Cool Push Button Switch and the Swing Push Button Switch. This creates a total of 4 sets of ...
how do a wire a second emergency shut off switch to my furnace Try wiring a "Three-Way" switch as follows Option 1. Fixture Controlled by Two Switches: Power Through a Switch Box Two three-way ...
Question about Honeywell Heating & Cooling
furnace wont run until i pull a hose from the pressure switch ok that switch is called proving switch and if it runs when you pull hose off that means switch is stuck-, normal ops- call for heat power
Question about Coleman Heating & Cooling
...my blower motor will not shut off. How do I fix this problem? I have purchased a relay and limit switch but it does not work yet. How do i fix it? Have you checked all the limit switches you have ...
Intertherm low pressure switch not working I have replace the board,contactor and the cumpastor.But the out side unit will not come on.I am getting power from 24v to 26v on the board.But fron the C ...
276 questions posted
Usually answered in minutes!
59 Questions
39 Questions
36 Questions
31 Questions
21 Questions