...dlink router , getting 0.0.0.0 ip address for wan Hi, first establish that the wires are plugged in to the correct ports, WAN port on the back of the router is in the internet port on the ADSL ...
...solid , then put the pwr back to dlink ). Make sure DSL light on the modem solid, internet light & WLAN light on the link glowing. - Make Hardwire connection between the computer to Dlink and check ...
...dlink 2640, working ok for 2 years- now power light is solid red. No other lights on. Will not connect 192.168.1.1 I have same problem. I was able to manually assign IP of 192.168.1.2 and was able to ...
...dlink and it says its connected but i dont get internet access what do i do if all lights are green and solid, your router is connected fine. but if have another PC to test it, it could be your ...
Question about D-Link Computers & Internet
...dlink router it turns on and i have all of the right cords plugged in and it won't connect to the internet and i dont know why. Can you help? Are you trying to connect wirelessly or with a wire? Can ...
Question about D-Link Computers & Internet
...lights are solid when you are connected, and the connection is idle. The lights blink when traffic is present. The lights are off when there is no connection. if they stay on they are not connecting ...
Question about D-Link Computers & Internet
...lights should blink and respond normally. If this does not work, the router is no longer working and should be replaced. Here is the link for the DLink WBR-2310 Reset the router to factory default ...
Question about D-Link Computers & Internet
dlink dir-600 router cannot connect to the internet Check the cable modem status light. If this cable is loose at either connection point, you must tighten it before hoping to attain your Wi-Fi signal
...dlink router keeps reseting or something. all the lights flash like its working (m2, WAN, 1-4) then it switches to a solid m1 light for a split second and back to the others flashing. I know its the ...
...lights that will go solid while holding the reset button. Keep holding the reset until they start blinking. Its now reset. To reconfigure: 1. Type in 192.168.2.1 on your web browser. 2. At Router's ...
221 questions posted
Usually answered in minutes!
952 Questions
299 Questions
248 Questions
219 Questions
64 Questions