Denon DP-47F Turntable "anti skate weight" Questions

...anti skate setting at the back of the turn table, a round adjustable bit with numbers, increase the anti skate and then use the balance weigth (weight right at the back of the arm that turns to get ...

...is gone and therefore the needle isn't holding to the grooves rather than a tracking weight or anti skate problem. [email protected] hi, take a WD40 spray it gently on the part of the

...anti skate settings. 1) The Headshell Weight and Balance Firstly, check the data sheet for the cartridge and stylus you are using. It should tell you the correct weight setting which will vary from ...

record; doesn't engage grooves stylus "skates" across record when turntable is turned on (new at-lp2D-usb turntable, just assembled). Increase the weight of the arm, check if it has anti-skate control

Anti-skate control set to low. First check the stylus you should feel it sticking in you finger a bit. 2 Has the weight on the end of the arm become lose? Adjust for the correct tracking weight of the

...anti-skate and tonearm weight combinations to no avail. And as I said it does this on some records throughout others just a certain points and others not really at all. Thanks Not enough weight and ...

...own. It does this evan when the counter weight and cartridge are are removed. Set the tracking weight and then adjust the anti skate forward to the same setting as tracking weight. ...

...anti - skate and tone arm hight on my turntables what are the proper specs, thanks. Anti skate should be set the same as the weight, i.e 3 gram of weight = 3 on the anti skate. ...

...anti-skate control as well (example if the arm is tracking at 2 grams, anti-skate must be set at 2). Follow these instructions for setting the counter balance: Turn the weight so that the arm is just ...

anti-skate adjustment. Set the antiskate adjustment to the same number as the needle pressure setting (i.e. 2.5 grams would be an anti-skate setting of 2.5). If you are back cueing or scratching, then