NAD 533 Turntable "rubber band" Questions

...the rubber band be changed? the belt (aka rubber band) should be changed when it starts to slip it is not whats causing the table to turn backwards. it's the motor or circut that drives the

rubber band that runs the table came off. i do not know how it goes back on? you lift the table with a bit of effort, place the band onto small motor weel put band onto bottom of table wheel and lower

...band is broken Unfortunately, many rubber parts and "bands" age as these units get old, or from repeated use. The drive band stretches, falls off or breaks... I recommend contacting the manufacturer ...

rubber band will do the trick) before turning the whole thing upside down and unscrewing the base. Replacement drive belts are easily available on the internet. Search by make and model number of your

Need Online source for turntable belt Old belt is way too loose, large rubber band didn't work! try these? mailto:[email protected]

the rubber band that turns the turn table came off. how to i put it back on? Download Instructions for belt replacement at link below http://www.lpgear.com/at_pl50_om.pdf

I played three records came back to change records and it will not turn Lift the actual turntable off and see if the rubber band has snapped, if so replace, if not then it may be a faulty motor

...rubber band, the size of the turntable, removed years ago then put back in the box- until now i barely have opened the box to sell the turntable but would love to know where this large rubber band ...

...rubber band out just to see if the unit would work with new bands, I broke the stiff plastic "retainer" that by its shape was designed to be pushed out of the way a bit to allow the worm gear to be ...

rubber band under the record player has come off On moving, the rubber band under the record player has come off. I don't know how to replace it to get it to work again. Thanks. I am not familiar with