Teac P-988 Turntable "rca turntables" Questions

I have a Technics turntable Model: SL-BD22-KM, Ser.#: GF3Fc73813. The RCA and ground connection panel on the turntable has been jurked-out tearing the wires apart. I need to know which wires are ...

I have a RCA turntable that will not play without considerable distortion when plugged into the "phono" input of two different recievers. It will woek when plugged into the "Tape ...

Sounds from turntable I have the turntable hooked up to my iMac. I do not have the RCA cable hooked up. I set the software. I can hear the records playing from my computer, but I am also hearing sound

How do I replace the RCA Cable for my turntable. How do I open the turntable base to replace the RCA Cable on my 1245? I have replaced connectors several times, and continue to have one channel or the

...RCA cables that are installed with the turntables, as they aren't of the greatest quality. Try and put a better brand, or use the MOGAMI cables, available HERE. FYI, Serato requires a nice strong ...

new needle looking for a needle for our turntable.... try rca company, if it's older try thrifts stores, or pawn shops

...There is no such ground points in the Stanton STR8-100. The main thing you have to check is the RCA cable used. You should a high quality RCA cable suitable for Phono connections. If you use a ...

lame rca rca is only producing sound from one side(with a jiggle it makes a bad earth sound on the "missing" side)bvvvvvvvvvvvvvvvvvvvvv You have a bad rca that tends to happen after time ... your ...

new turntable has rca out but a miniplug for reciever connection If your receiver only has a mini plug in you will need a phono pre amp that takes phono in and pit line level out. Then you can use an ...

...You will need the following to connect this to that system: 1) Phono Pre-amp 2) 3.5mm to RCA adapter or 3.5mm 'Y' cable to RCA 3) Turntable Your turntable will connect to the Phono Pre-Amp ...