Brother MFC-8220 Fax "copy scanner code" Questions

copy or send out a fax. The scanner is not bright enough to do its job. Moisture or a very dim-lighted scanner will trigger this. This needs to be removed by a printer /fax machine repair person. Hope

On a Sharp AR-157E, I make several copies and after the copies are completed, the copier displays an E7 error. It also gives an intermittent F5 code. What do the codes represent Finally tracked down ...

...copy machine it shows 000202 code on screen please help me. When you turn on the copier the scanner should move out of home position and the light come on. If the scanner moves you have a bad sensor. ...

...copy it prints out with horizontal lines down the middle. It kinda looks like a ''bar code''. But when I print a ''reports'' page they come out clean. Any ideas on what might be the problem? This is ...

code C-3100. What does this mean and what can I do to rectify it? Thanks for your help. David C3100 Scanner carriage problem The home position is not correct when the power is turned on or copying the

sure it still works? L3-00 is a code meaning that there is a problem with the scanner return. You can have a look at the sensors under the platen glass and look for a connector out of place. GOOD LUCK

...scanner after pressing copy to see what is happening. You could open up the scanner and check the movement to make sure it's smoth, but this is a lot of work. The best option is to pick up a used ...

...scanner to reset the values. But off hand I can't remember the exact numbers. I will get look them up and send it on here. It is not hard to do at all. Will take about 2 or 3 minutes. Shading ...

copy. The toner is also weaker in the same 1.5 inch stripe. David Bendah i'm not sure if you're talking about a solid black band or a bunch of little stripes running down page. does it happen when you

scanner located under the big glass. F-5 is bright light that comes on when you make a copy or the reader located under the glass that see the original, the E7 deals with shading of the original again