...CLEAN ADF ROLLER. Open the ADF. Press SET. Each time you press SET, the rollers will rotate a partial turn. With the corner of a soft cloth slightly moistened with isopropyl (rubbing) alcohol, wipe ...
...clean rollers. If you have roller cleaner that would be great or 91% alcohol but be very careful with the alcohol. DO NOT use anything below 91% because it can cause damage to the rollers. If this ...
Question about Office Equipment & Supplies
clean this roller with wd40 as it will soften the rubber and get it to "grip". these rollers (lower of three) are always the first to go "bald on any mnf copier in the ADF and Drawers causing multiple
Question about Canon Office Equipment & Supplies
...roller and the separator pad, press the Power button to turn off the product. Wait three to five seconds and then press the Power button to turn the product on. The ADF rollers should reset to the ...
...from ADF .. then clean the adf rollers as well .. You will be able to lift the ADF rollers and there will be a mat as well underneath the rollers.. clean them as well .. the issue would be
Question about Canon Office Equipment & Supplies
...Do not use alcohol as this will dry our your rollers and cause them to eventually crack. Just use soap and water to clean the rollers. Then reinstall the ADF feeder assembly back on the
Question about Canon Office Equipment & Supplies
Roller marks on copies. I ran the cleaning menu and it asks me to open the ADF to clean the rollers.. How do you do that and where is it. The adf is the automatic document feeder and its located on ...
...clean in that area. On the ADF: Open the small ADF cover on the top right. There you will see rollers and a paper sensor. First make sure the isn't any paper stuck in the rollers. Clean the rollers ...
clean the ADF rollers on HP 3390 Printer. Hi, You get a detailed description of cleaning the ADF roller from the below link http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc
...ADF cover and clean the rollers gently with some isopropyl alcohol on a soft cloth, let dry for about 10 minutes. Also check to see that the top seperator pad is not worn out. This pad should be ...
242 questions posted
Usually answered in minutes!
2,244 Questions
2,149 Questions
1,862 Questions
1,594 Questions
1,302 Questions